• Ingen resultater fundet

13/96336-34 0 Published UK edition Technical regulation 3.2.5 for wind power plants with a power output above 11 kW Guidelines on signal list

N/A
N/A
Info
Hent
Protected

Academic year: 2022

Del "13/96336-34 0 Published UK edition Technical regulation 3.2.5 for wind power plants with a power output above 11 kW Guidelines on signal list"

Copied!
6
0
0

Indlæser.... (se fuldtekst nu)

Hele teksten

(1)

Guidelines on signal list Technical regulation 3.2.5

for wind power plants with a power output above 11 kW

0 Published UK edition 05.12.2014 12.12.2014 15.12.2014 15.12.2014 DATE

KDJ XLOC BJA TSK NAME

REV. DESCRIPTION PREPARED CHECKED REVIEWED APPROVED

13/96336-34

© Energinet.dk

(2)

Revision view

Doc. 13/96336-34 Guidelines on signal list – TR 3.2.5 2/6

Revision view

Section no. Text Revision Date

New document, UK edition 0 15.12.2014

(3)

Table of contents

Doc. 13/96336-34 Guidelines on signal list – TR 3.2.5 3/6

Table of contents

Revision view ... 2

Table of contents ... 3

Reading instructions ... 4

1. Signal list ... 5

(4)

Reading instructions

Doc. 13/96336-34 Guidelines on signal list – TR 3.2.5 4/6

Reading instructions

These guidelines are prepared as an aid for understanding a few more details concerning the required signals for all categories of wind power plants which the plants must be able to exchange with the electricity supply undertaking at the PCOM interface in order to be connected to the public electricity supply grid in Denmark.

References made to the applied standards, norms, technical regulations etc. are described in Technical regulation 3.2.5. Abbreviations used are also described in Technical regulation 3.2.5.

These guidelines are published by Energinet.dk and are available at www.energinet.dk.

(5)

Signal list

Doc. 13/96336-34 Guidelines on signal list – TR 3.2.5 5/6

1. Signal list

Requirements for information, measuring signals, status signals and possibilities of activation are specified in Technical regulation 3.2.5, Section 7.

In the overview below, a few more details are described regarding the individual signals and a general explanation about the use of information, signals, etc.

The information must be available for the wind power plant at the PCOM inter- face.

Activation of the individual functions in the plants and configuration of the spe- cific parameters and the scope of measuring signals for system operation must meet the requirements stated in Technical Regulation TR 5.8.1 – “Metering regu- lation for system operation purposes” dated 25 March 2008.

These guidelines and the remaining documents regarding requirements for grid connection can be downloaded from www.energinet.dk.

The signal list which follows on the next page is prepared in MS Excel file format and can also be downloaded from www.energinet.dk.

(6)

Signal list

Doc. 13/96336-34 Guidelines on signal list – TR 3.2.5 6/6

Referencer

RELATEREDE DOKUMENTER

Most articles in literature focus on the technical regula- tions regarding the connection of large WPPs to the HV- transmission system and the enabling technologies that have

The electricity supply undertaking is responsible for supplying limit values for the emission of the various types of distortions coming from the PV power plant in the Point

The objective of technical regulation TR 3.2.5 is to specify the minimum technical and functional requirements that a wind power plant with a rated power above 11 kW must comply

These guidelines have been prepared as an aid for understanding a few more details concerning the required signals for all photovoltaic (PV) power plant categories with which

3.4 Sample calculation of limit value for the medium-voltage grid Sample calculation of harmonics 5 when connecting a PV power plant of 2 MW (S i ) to a 10 kV radial in

X X Frequency control - initial frequency for dead band - f2 Frequency control 49.80 - 50.00 49.88 Hz Set point Input for frequency stabilisation in POC Plant owner Optional

The objective of technical regulation TR 3.2.3 is to specify the minimum tech- nical and functional requirements that a thermal plant with a synchronous or asynchronous generator

Thus, the automatic Power Factor control function requirement will apply to A1 plants with asynchronous generators connected to the grid under technical regulation 3.2.1 after 4