• Ingen resultater fundet

Eksempel på forskellige nødvendige godkendelser og standarder (UK)

N/A
N/A
Info
Hent
Protected

Academic year: 2022

Del "Eksempel på forskellige nødvendige godkendelser og standarder (UK)"

Copied!
22
0
0

Indlæser.... (se fuldtekst nu)

Hele teksten

(1)

Approvals and Standards Required for UK

WRAS (water regulations advisory scheme)

Compliance with Building regulations Part G3

Compliance with Building regulations Part F

Compliance with Building regulations Part L

Listing in Part L Appendix Q

Compliance with Building regulations Part P EMC

LVD CE

Eksempel på forskellige nødvendige godkendelser og

standarder (UK)

(2)

Heat pump standards UK

BS 1306:1975 Specification for copper and copper alloy pressure piping systems BS 1710:1984 Specification for identification of pipelines and services

BS 7074-1: 1989 Application, selection and instillation of expansion vessels and ancillary equipment for sealed water systems. Code of practice for domestic heating and hot water supply

BS 7593: 2006 Code of practice for treatment of water in domestic hot water central heating systems BS 7671:2008 Requirements for electrical installation. IEE Wiring regulations (17th edition)

BS EN 1254-1:1998 Copper and copper alloys. Plumbing fittings. Fittings with ends for capillary soldering or capillary brazing to copper tubes BS EN 1254-2:1998 Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with copper tubes

BS EN 1254-3:1998 Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with plastics pipes

BS EN 1254-4:1998 Copper and copper alloys. Plumbing fittings. Fittings combining other end connections with capillary or compression ends BS EN 1254-5:1998 Copper and copper alloys. Plumbing fittings. Fittings with short ends for capillary brazing to copper tubes

BS EN 12828:2003 Heating systems in buildings. Design for water-based heating systems BS EN 14324: 2004 Brazing - Guidance on the application of brazed joints

BS EN 14511-1:2007 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 1: Terms and definitions

BS EN 14511-2:2007 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 2: Test conditions

BS EN 14511-3:2007 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 3: Test methods

Eksempel på forskellige normer og standarder

(3)

BS EN 14511-4:2004 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 4: Requirements

BS EN 15332:2007 Heating boilers - Energetic assessment of hot water storage tanks

BS EN 378-1: 2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria

BS EN 378-2: 2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

BS EN 378-3: 2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection

BS EN 378-4: 2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery

BS EN 50366:2003 Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement

BS EN 55014-1:2006 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission BS EN 55014-2:1997,

CISPR 14-2:1997

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard

BS EN 60335-

1:2002+A2:2006 Household and similar electrical appliances - Safety -- Part 1: General requirements

BS EN 60335-2-40:2003 Household and similar electrical appliances - Safety -- Part 2-40: Particular requirements for electrical heat pumps, air- conditioners and dehumidifiers

BS EN 61000-3-2:2006 Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)

BS EN 61000-3-3:2008, IEC 61000-3-3:2008

Electromagnetic compatibility (EMC) -- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection BS EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human

exposure

BS EN 12102:2008 Air conditioners, heat pumps and dehumidifiers with electrically driven compressors – Measurement of airborne noise – Determination of the sound power level.

BS EN 13771-1:2003 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors

Eksempel på forskellige normer og standarder

(4)

BS EN 13771-1:2003 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors BS EN 13771-2:2007 Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units EN 255-3:1997/AC:1997 Heat pumps for sanitary warm water

BS EN 60204-1:2006 Safety of machinery - Electrical equipment of machines -- Part 1: General requirements EN 60335-2-

21:2003/A1:2005 Household and similar electrical appliances - Safety -- Part 2-21: Particular requirements for storage water heaters

BS EN 61000-3-11:2001 Electromagnetic compatibility (EMC) -- Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection

EN 61000-4-

2:1995/A1:1998 Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-4: 1995 Electromagnetic compatibility (EMC) -- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity

test

BS EN ISO 11203:1996 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

BS EN ISO 3743-2:1997 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994)

BS EN 61000-4-2:1995 Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

Eksempel på forskellige normer og standarder

(5)

Bedingungen die subentionen zu erhalten:

A) Wärmepumpen sole-wasser oder sole-sole mit kältmittelkreislauf als erdwärmeträger= COP grösser oder gleich 3,3 bei -5°C

aussentemperatur und einer kondensationsstemperatur von 35 ° C.(1 ° Les pompes à chaleur géothermiques à capteur fluide frigorigène detype sol-sol ou sol-eau ayant un coefficient de performance supérieurou égal à 3,3 pour une température d'évaporation de - 5 °C et unetempérature de condensation de 35 °C)

B) Wärmepumpen wasser-wasser mit wasser-glycol-kreislauf als

erdwärmeträger= COP grösser oder gleich 3,3 bei 0°C. bei ein- und austritt des kreislaufes und -3°C kondensationsstemperatur,ein- und

austrittstemperatur zwischen 30°C. und 35°C. beim kondensator(2° Les pompes à chaleur géothermiques de type eau glycolée/eau ayant

uncoefficient de performance supérieur ou égal à 3,3 pour destempératures d'entrée et de sortie d'eau glycolée de 0° C et - 3 °C àl'évaporateur, et des températures d'entrée et de sortie d'eau de 30 °Cet 35 °C au condenseur, selon le référentiel de la norme d'essai14511-2)C)

Eksempel på forskellige definitioner for opnåelse af tilskud

(6)

C) Wärmepumpen wasser-wasser geothermie= COP grösser oder gleich 3,3 bei einer austrittstemperatur von 10°C. und 7°C. wassertemperatur beim verdampfer.

und zwischen 30°C. und 35°C. beim kondensator(3° Les pompes à chaleur

géothermiques de type eau/eau ayant uncoefficient de performance supérieur ou égal à 3,3 pour destempératures d'entrée et de sortie de 10 ° C et 7 ° C d'eau

àl'évaporateur, et de 30 °C et 35 °C au condenseur, selon le référentielde la norme d'essai 14511-2)D)

Wärmepumpen luft-wasser= COP grösser oder gleich 3,3 bei 7°C

verdampfertemperatur, ein- und austrittstemperatur zwischen 30 ° C. und 35 ° C. beim kondensator.(4° Les pompes à chaleur air/eau ayant un coefficient de

performancesupérieur ou égal à 3,3 pour une température d'entrée d'air de 7 °C àl'évaporateur, et des températures d'entrée et de sortie d'eau de 30 °Cet 35 °C au condenseur, selon le référentiel de la norme d'essai14511-2)

Eksempel på forskellige definitioner for opnåelse af tilskud

(7)

Test af ventilationsanlæg med varmepumper

Hvordan griber vi det an i Nilan?

- V/ Udviklingsingeniør Ph.D Lis Jacobsen, Nilan A/S

(8)

Formål med testen

Dokumentation for kunder og myndigheder

Ydelse

Funktion

Sikkerhed

(9)

Test og dokumentation af ventilationsvarmepumper

COP luft-luft COP luft-vand SEL

Kapacitet

Temperaturvirkningsgrad Relativ COP

Lækage

Testresultater - Ydelse

(10)

Test og dokumentation af ventilationsvarmepumper

Comfort Hygiejne Støj

Vibration Afrimning

Testresultater - Funktion

(11)

Test og dokumentation af ventilationsvarmepumper

BR10

Passivhaus (Tyskland) SAP 2005 (England)

DIBt (Tyskland)

Minergie P (Schweiz)

Wohnbauförderung (Østrig)

Specifikke krav til test af ydelse

nationale myndigheder og organisationer

(12)

Eksempel Passivhaus teststandard

Måling og beregning af data til PHPP

Lækage: EN 308

Støj: EN 3743-1 and EN 9614-2, (31,5-8000Hz)

Behagelighedskriterie: PHI

Afrimning: PHI

Temperaturvirkningsgrad: DIBt

SEL: PHI

COP L/V L/L: PHI (EN 255)

Kapacitet: PHI

(13)

Grænseværdier

Lækage: Max. 3% af middel volumenstrøm

Støj: Lydeffekt overflade Lw(A): Opholdsrum 25 dB(A), Bryggers 30 dB(A) Behagelighedskriterie: Indblæsningstemperatur minimum 16,5 C ved t_ude = -10 C

Afrimning: Kontinuerlig volumenstrøm ved t_ude = -16 C Temperaturvirkningsgrad: Minimum 75% (tør)

SEL: Max. 0,45 W/m

3

h (1620 J/m

3

)

Filter klasse: Indblæsning F7, udsugning G4

COP L/V L/L: PHPP Klimadaten Standard, Grænseværdi 55 kWh/(m

2

a)

Kapacitet: Balanceret luftskifte

Strømsvigt Automatisk genstart driftsopsætning

(14)

Skabelon – tast overskrift

EN255-3

PHI Prüfverfaren

COP:

EN255-3 1. Tappning 2. Standby

PHI Prüfverfaren 1. Opladning 2. Tapning

Coefficient of Performance COP luft/vand

(15)

Test og dokumentation af ventilationsvarmepumper

Passivhaus

ηeff,WRG=(t11-t12+Wel/m*Cp)/(t11-t12)

EN 308

ηt=(t22-t21)/(t11-t21)

Eksempel på forskellige definitioner for

temperaturvirkningsgrad

(16)

Test og dokumentation af ventilationsvarmepumper

Hvilken standard?

Opsætning af anlæg: Interne og eksterne modtryk.

Beregning: Totale elforbrug eller elforbrug til blæsere.

Definition på SEL-værdi?

(17)

Test og dokumentation af ventilationsvarmepumper

Ydelse: EN 14511, EN 14825

(18)

Ydelse: EN255-3

Ydelse: EN 255-3

(19)

Ydelse: EN255-3

Ydelse: EN 14511, EN 255-3

(20)

Test og dokumentation af ventilationsvarmepumper

Ydelse: EN 14511, EN 14825, EN 308, EN 255-3

(21)

Test og dokumentation af ventilationsvarmepumper

Test faciliteter hos Nilan

(22)

Test og dokumentation af ventilationsvarmepumper Vores erfaringer/anbefalinger

• Det er vanskeligt at få et overblik over hvilke nationale krav der stilles til dokumentation

• De nationale krav til dokumentation er sjældent identiske

• Definitioner i standarderne omfatter ikke alle anlægstyper

• Kravene til ydelse ændres konstant, hvilket nødvendiggør nye produkter og ny dokumentation

• Specifikation af anlægstyper er ofte utilstrækkelig dvs. vi

sammenligner æbler og pærer

Referencer

RELATEREDE DOKUMENTER

Figure 30: District heating production by type of energy and renewables share in district heating 2017-2030 [PJ].. Heat pumps cover production from ambient heat and

• An integrated unit providing Heating, Air Conditioning and DHW, based on Carbon Dioxide as the refrigerant, with air or water as heat source/sink. • Combining ejectors and

Annex 48 - Task 1 Report Denmark, December 2019 Figure 4-3: Utilization potential of excess heat with heat pumps and average COP in the Danish manufac- turing industry assuming

The first step is an energy mapping, where all processes with a heating and cooling de- mand, as well as the possible excess heat sources and the utility system, are systemati-

skoppen og ikke ministeren, er som anført ubestrideligt. I den første ønskede kirkeministeren at ansætte en præst i sognet Vaalse, men biskoppen ville ikke give

Nature morte med hvid Kande og et Fad Æbler.. ^Nature morte — den

” Technical and Economic Working Domains of Industrial Heat Pumps: Part 2- Ammonia-Water Hybrid Absorption-Compression Heat Pumps”. 11th IIR Gustav Lorentzen Conference on

• Large district heating heat pumps, utilising various external heat sources like air, water, excess heat, waste water etc. • Thermal seasonal storage implemented in